Tip: Setting the Workplane Normal to a Curve

One my favorite shortcuts is the “c” key. Hitting the “c” key with a snap point highlighted by LogiCursor will set the WorkPlane to the snap location. Hitting the “c” key repeatedly thereafter will toggle the WorkPlane orientation from:

  • Top (XY plane)
  • Side (YZ plane)
  • Front (XZ Plane)
  • Use view
  • Normal to Curve
  • Check out the video below where the “c” key is used to set the workplane for a profile to sweep along a 3D path.
    CSnap

    Leave a Reply